Số sản phẩm : 0
Thành tiền : VND
Xem giỏ hàng
Điện thoại hoặc mã đơn hàng

Đang truy cập: 105
Trong ngày: 2987
Trong tuần: 19646
Lượt truy cập: 1508943


















Giá : 8.890.000 VND

Số lượng    

 

Máy In 3D CREALITY Ender 3 S1 FDM Printer

Có giờ bạn ước rằng dòng Ender 3 có thể in được nhựa dẻo? Có bao giờ bạn mong muốn có một máy in Ender 3 với chức năng tự động cân bàn? Cuối cùng, Creality đã lắng nghe và tạo ra Ender 3 S1, cung cấp cho chúng ta một máy in có bộ đùn truyền động trực tiếp, bàn lót mới và cảm ứng CR touch cân bàn tự động.

Chúng ta đều biết rằng dòng Ender 3 là dòng máy in phổ biến nhất trong số các dòng máy in tầm trung. Năm ngoái, Creality đã khiến chúng ta ngạc nhiên với Ender 3 V2 - một chiếc máy in đẹp, có ngăn kéo đựng dụng cụ, màn hình màu mới và bo mạch chủ yên tĩnh. Lần này chúng tôi giới thiệu cho bạn một chiếc Ender 3 S1 thậm chí còn tốt hơn, lớn hơn với nhiều cải tiến.

CÁC TÍNH NĂNG QUAN TRỌNG NHẤT

  • Bộ đùn truyền động trực tiếp "Sprite"
  • Tấm in thép lò xo PC có thể tháo rời
  • CR Touch (tự động cân bàn bằng đầu dò kim loại)
  • Hai động cơ trục Z kép
  • Nâng cấp trục Z kép với ròng rọc và đai thời gian
  • Cảm biến sợi in
  • Bo mạch 32 bit với trình điều khiển siêu yên lặng
  • Màn hình LCD núm xoay 4,3 inch với giao diện UI mới
  • Bộ căng đai X và Y
  • Hộp công cụ
  • Bộ giữ dây nhựa in
  • Dễ dàng lắp ráp (khoảng 10 phút)
  • Hỗ trợ đèn LED và bộ khắc Laser (Bán riêng)

CÓ GÌ MỚI?

1. BỘ TRUYỀN ĐỘNG TRỰC TIẾP (Direct Drive)

Máy đùn là bộ phận quan trọng nhất của máy in 3D. Tại sao? Bởi vì nó đẩy dây nhựa qua đầu in được làm nóng, nơi nó được nấu chảy và ép đùn. Tất cả các máy đùn đều có ba bộ phận giống hệt nhau và chúng được gọi là động cơ bước, bánh răng dẫn động và bộ phận đầu in. Trong khi các thành phần của máy đùn luôn giống nhau, chúng ta có hai loại máy đùn khác nhau: Bowden và Direct drive. Sự khác biệt giữa hai loại này là ở vị trí của máy đùn và khoảng cách mà dây nhựa phải di chuyển trước khi đi vào đầu in được làm nóng.

Máy đùn truyền động trực tiếp có khoảng cách và độ rút nhỏ hơn. Ngoài ra, các lệnh đùn nhanh hơn, điều này tạo ra sự kiểm soát lắng đọng vật liệu ổn định hơn và do đó độ phân giải cũng cao hơn. Khả năng kiểm soát cao hơn và đường đi ngắn hơn của dây nhựa giúp việc in các vật liệu đặc biệt khác (như nhựa dẻo) trở nên rất dễ dàng và mang lại hiệu quả tốt hơn. Vì đầu đùn và đầu đun rất gần nhau, lực do máy đùn cung cấp không cần mạnh quá nên xác suất bị trượt dây nhựa in giảm đáng kể.

2. TẤM LÓT PC TỪ TÍNH

Ender 3S1 có tấm lót mới - tấm PC từ tính, cứng cáp và chịu lực hơn rất nhiều so với tấm từ tính cũ trên máy Ender 3 PRO. Tấm lót chịu được nhiệt độ cao hơn và dẻo dai hơn, từ tính tốt và dễ dàng tháo rời, phù hợp với PLA, PETG, PEEK, ABS, ASA, TPU và các loại nhựa khác. Với tấm lót này bạn sẽ không cần bất kỳ băng dính, keo dán hay xẻng xúc nào, Dễ bám dính vào bề mặt in, dễ dàng tháo bản in, chỉ cần uốn nhẹ là bản in của bạn sẽ bung ra ngay.

PC là một bản nâng cấp tuyệt vời vì nó có thể chịu được nhiều chu kỳ nhiệt mà giường nhiệt in 3D trải qua từ bản in này sang bản in khác.

3. CR-TOUCH VỚI ĐẦU DÒ KIM LOẠI

Vì nhiều nhà sản xuất gặp vấn đề với BL-touch và đầu dò nhựa, nên Creality đã nâng cấp và tạo ra CR-touch với chân cảm biến kim loại, không thể va chạm với giường in vì nó luôn tự động rút lại. Nó cũng chính xác hơn BL-touch và sự khác biệt quan trọng nhất là trong cảm biến: CR-touch sử dụng công nghệ cảm biến quang học để phát hiện vị trí của đầu dò bên trong (BL-touch đo điện từ trường). Công nghệ CR-touch mới này nhanh và nhạy hơn, tuổi thọ cao hơn, bền bỉ hơn.

Chiều dài:

39,46 mm

Chiều dài (với chân dò mở rộng):

44,98 mm

Chiều rộng:

16,18 mm x 16,24 mm

Trọng lượng:

11 g

4. HAI MOTOR TRỤC Z

Motor trục Z chịu trách nhiệm cho chuyển động của hệ thống dọc theo trục Z. Trên máy in Ender 3, giàn trục X đôi khi có thể nghiêng do trọng lượng bổ sung của đầu in đè lên thanh Z hoặc các ổ trục ở một bên khiến trọng lượng mất cân bằng. Điều này có thể ảnh hưởng đến chất lượng in, nó có thể tạo ra các vấn đề về cân bàn, vì đầu in có thể ở độ cao khác dọc theo trục X nếu trục bị nghiêng hoặc lung lay.

Với Ender 3 S1, bạn sẽ không gặp phải vấn đề này, vì có hai motor trục -Z với các thanh ren đảm bảo sự ổn định của trục X trong quá trình in và cũng có thể giảm mài mòn các thành phần cơ khí.

5. NÂNG CẤP TRỤC Z KÉP VỚI RÒNG RỌC VÀ ĐAI THỜI GIAN

Bên cạnh hai motor trục Z, chúng ta cũng có thể tìm thấy một ròng rọc và dây đai thời gian. Bằng cách này, bản in sẽ chính xác hơn và máy đùn có thể di chuyển đều trên trục Z. Nâng cấp bổ sung này rất hữu ích, đặc biệt nếu bạn muốn in nhanh hơn. Vì máy đùn truyền động trực tiếp được đặt gần đầu in, nên có nghĩa là có trọng lượng nhiều hơn một chút so với phía bên kia. Bằng cách này, ròng rọc và đai thời gian đảm bảo rằng chuyển động trên trục Z đều và chính xác.

6. BO MẠCH CHỦ 32-BIT SIÊU YÊN TĨNH

Trong máy in này, chúng ta có thể tìm thấy bo mạch chủ 32-bit là một trong những nâng cấp tốt nhất mà Creality đã thực hiện trong năm qua. Công việc chính của bo mạch chủ là kết nối và điều khiển các bộ phận cơ và điện của máy in 3D. Bảng điều khiển này giám sát mọi thứ có thể được thao tác kỹ thuật số, từ đầu đun, động cơ bước, quạt cho đến bàn nhiệt và đầu in. Với bo mạch này, bạn sẽ có một bộ quạt đặc biệt giúp kiểm soát nhiệt độ của các bộ điều khiển. Nó cũng đi kèm với vi mạch điều khiển STM32F103 sử dụng lõi Cortex-M3, với tốc độ CPU tối đa là 72 MHz. Các trình điều khiển im lặng cũng đảm bảo âm thanh của máy in chạy dưới 50 dB.

7. BỘ NGUỒN CỦA ENDER 3 S1

Bộ nguồn điện là hộp ẩn dưới gầm của Ender 3 S1, chứa một mạch chỉnh lưu và một máy biến áp có thể xử lý lên đến 24V và 350W. Lần này Creality quyết định làm bộ nguồn riêng cho Ender 3 S1 với lớp vỏ được làm từ hợp kim nhôm, có khả năng chịu lực tốt và bảo vệ hiệu quả các bộ phận bên trong. Nó cũng được thiết kế theo cách để quạt có thể tản nhiệt hiệu quả, an toàn và đáng tin cậy hơn. Máy biến áp đã giảm tỷ lệ sự cố và đảm bảo cung cấp điện hoạt động ổn định. Model bộ nguồn trong Ender 3 S1 là CMS-350-24.

Bộ nguồn Creality cho Ender 3 S1: CMS-350-24

ĐẦU VÀO

100-120 / 200-240 V ~ 8,6 / 4,3 A 50/60 Hz

ĐẦU RA

24V 14,6 A

8. CẢM BIẾN SỢI IN

Hãy tưởng tượng bạn đã dành một thời gian dài để thiết kế bản in 3D và thiết lập máy in. Bạn thực hiện một vài bài kiểm tra để tìm ra các thông số in tối ưu và bây giờ bạn bắt đầu in ngay trước khi đi ngủ với hy vọng thức dậy với một sản phẩm hoàn chỉnh. Bộ cảm biến giúp phát hiện khi dây nhựa của bạn hết hay bị gãy trong quá trình in. Máy in sẽ ngừng hoạt động. Cảm biến sẽ gửi tín hiệu đến máy in khi dây nhựa đi đến cuối ống dẫn và Ender 3 S1 sẽ tạm dừng lệnh in cho đến khi bạn thay dây nhựa mới. Đây là một trong những chức năng bổ sung quan trọng nhất của máy in.

 

Dòng sản phẩm Creality Ender Series:

- Ender 3: https://quanphongrc.vn/ct/may-bay-dieu-khien/4475/may-in-3d-creality-ender-3-fdm-printer.html

- Ender 3 Pro: https://quanphongrc.vn/ct/may-bay-dieu-khien/3990/may-in-3d-creality-ender-3-pro-fdm-printer.html

- Ender 3 V2: https://quanphongrc.vn/ct/may-bay-dieu-khien/3991/may-in-3d-creality-ender-3-v2-fdm-printer.html

- Ender 3 V2 Neo: https://quanphongrc.vn/ct/may-bay-dieu-khien/4984/may-in-3d-creality-ender-3-v2-neo-fdm-printer.html

- Ender 3 S1: https://quanphongrc.vn/ct/may-bay-dieu-khien/4665/may-in-3d-creality-ender-3-s1-fdm-printer.html

- Ender 3 S1 Pro: https://quanphongrc.vn/ct/may-bay-dieu-khien/4665/may-in-3d-creality-ender-3-s1-fdm-printer.html

- Ender 3 S1 Plus: https://quanphongrc.vn/ct/may-bay-dieu-khien/4822/may-in-3d-creality-ender-3-s1-plus-fdm-printer-300300300mm-tang-hop-nhua-esun.html

--------------------------------------------------------------------------------------------

How many of you wished that Ender 3 series could print flexible filaments? How many of you wished to have an Ender 3 printer with automatic bed leveling? Creality has finally heard us and made Ender 3 S1, which gives us a direct drive extruder, a new bed platform, and CR touch for automatic bed leveling.

We all know that the Ender 3 series is the most popular printer series among smaller models. Last year Creality surprised us with Ender 3 V2 - a slickest looking printer, with a drawer for candies or tools if you prefer, a new color display, and a silent motherboard. This time we present to you an even better, bigger Ender 3 S1 with many improvements. To begin with, the most important feature about this Ender 3 is that it has a direct drive, double traction, and full metal extruder, two fundamental sensors - the filament detection sensor, and the automatic leveling sensor. The new assembly of the printer is designed in a way that allows the user to put together the parts and start printing in just 10 minutes. It has a high precision Double-Z axis, two Z-axis motors, a new 32-bit motherboard with ultra-quiet drivers, and much more.

MOST IMPORTANT FEATURES

  • Direct drive extruder
  • Removable PC Spring Steel printing sheets
  • CR Touch (automatic bed leveling with a metal probe)
  • Two Z-axis motors
  • Dual Z-axis upgrade with pulley and timing belt
  • Filament sensor
  • 32-bit board with ultra-silent drivers
  • 4.3-inch knob LCD Screen with new UI interface
  • X and Y Belt Tensioner
  • Toolbox
  • Filament holder
  • Easy to assemble (10 minutes)
  • Support LED light and Laser Engraving (Sold Separately)

WHAT'S NEW?

1. DIRECT DRIVE EXTRUDER

An Extruder is the most important part of a 3D printer. Why? Because it pushes the filament through to the heated nozzle where it’s melted and extruded. All extruders have identical three parts and these are called the stepper motor, driver gear, and the idler. While the components of extruders are always the same, we have two different types of extruders: Bowden and Direct drive. The difference between the two is within the location of the extruder and how far the filament has to travel before it enters the heated nozzle.

Direct drive extruder has a smaller distance and retraction. Also, the extrusion commands are faster, which creates a more stable material deposition control, and consequently also higher resolution. This extra control and shorter route of the filament makes printing flexible and other special materials very easy and more likely to give us better results. Since the extruder and hot end are very close one to another, the force supplied by the extruder doesn't have to be as strong, meaning that there will be less probability of slipping filament via the hobbed bolt as the extruder will be more gentle on the filament.

2. PC MAGNETIC BUILD PLATE

Ender 3S1 has a new printing surface- the PC magnetic build plate. It is a lot stronger and more resistant than the old magnetic plate we get with Ender 3 PRO. This one resists higher temperatures and is more flexible, it is also removable and can stick to magnetics very well. It matches great with PLA, PETG, PEEK, ABS, ASA, TPU, and other filaments. With this plate, you won't need any tape,  glue, or shovel. It's easy to adhere to the printing surface, it's easy to remove the prints, just flex slightly to pop your print right off.

PC is an excellent upgrade because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.

3. CR-TOUCH WITH A METAL PROBE

Since a lot of makers had problems with BL-touch and the plastic pin, Creality upgraded it and made CR-touch with a metallic sensor pin, which can't collide with the print bed because it is always automatically retracted. It is also more accurate than the BL-touch and looks different. The most important difference is in the sensor; CR-touch uses optical sensor technology to detect the position of the pin inside (BL-touch measures electromagnetic fields). This type of technology is very reliable and fast. The CR-Touch has a longer life and higher repeatability.

Length:

39.46 mm

Length (with sensor pin extended):

44.98 mm

Width:

16.18 mm x 16.24 mm

Weight:

11 g

4. TWO Z-AXIS MOTORS

The Z-axis motor is responsible for the platform's movement along the Z-axis. On an Ender 3 printer, the X-axis gantry can sometimes lean because of the additional weight of the print head that is put on the Z rod or bearings on the one side as a result of the off-balance weight. This can affect the printing quality, it can create bed leveling problems, as the hot end can be at a different height along the X gantry if the gantry is tilted or wobbles. Wobbling can also lead to other problems like ringing.

With Ender 3 S1 you won't be having this type of problem, since having two -Z- axis motors with the threaded rods ensures the stability of the X-axis during print and can also reduce wear on the mechanical components.

5. DUAL Z-AXIS UPGRADE WITH PULLEY AND TIMING BELT

Besides the two Z-axis motors, we can also find a pulley and timing belt. This way the print will be even more precise and the extruder can move on the Z-axis evenly. This extra upgrade is very useful especially if you want to print faster.   Since the direct drive extruder is positioned near the hotend it means that there is a little bit more weight than on the other side. This way the pulley and the timing belt guarantees that the movement on the Z-axis is evenly and very precise.

6. 32-BIT MOTHERBOARD WITH ULTRA-SILENT DRIVERS

In this printer, we can find a 32-bit motherboard that is one of the best upgrades that Creality has made in the last year. The main job of the motherboard is to connect and control the mechanical and electrical parts of a 3D printer. This control board supervises everything that can be digitally manipulated, from the heaters, stepper motors, fans up to the thermistor bed and the thermistor nozzle. With this board, you get a special set of fans that control the temperatures of the drivers, so they won't get too hot. It also comes with STM32F103 microcontrollers that use the Cortex-M3 core, with a maximum CPU speed of 72 MHz. The silent drivers also guarantee the sound of the printer running below 50 dB.

7. ENDER 3 S1 POWER SUPPLY CREALITY

Power supply is the hidden box under the bed of Ender 3 S1, thanks to which your printer magically works 😊 It contains a rectifier circuit and a transformer that can process up to 24 volts and 350 Watt. This time Creality decided to make their own power supply for Ender 3 S1 with a shell made of an aluminum alloy, which has good compression resistance and effectively protects internal parts. It is also designed in a way so that the fan can effectively dissipate the heat, which makes it more safe and reliable. The transformer reduced the failure rate and ensures the stable operation of the power supply. The power supply model we can find in the Ender 3 S1 is CMS-350-24.

Creality power supply for Ender 3 S1:  CMS-350-24

INPUT

100-120/200-240 V ~ 8.6/4.3 A 50/60 Hz

OUTPUT

24V  14.6 A

8. SENSOR FILAMENT/FILAMENT RUNOUT SENSOR

Imagine you've spent a long time designing the 3D model and setting up the printer. You make a few tests to find the optimal printing parameters, and now you start printing just before going to bed hoping to wake up to a freshly printed model. Well, without the sensor that is probably impossible.

The sensor filament helps us detect when your filament runs out during the printing process. The printer will stop working at the appropriate time and it will give us the chance to rescue the 3d model and to save the print quality.  The sensor will send the signal to the printer when the filament comes to the end of the spool and the Ender 3 S1 will pause the print job until we load the new spool. The automatic filament runout recognition is one of the most important additional functions of the printer.

e3s1-parameter

 
 

 

6

- Cách thức mua hàng vui lòng xem tại đây!

- Mua hàng hỗ trợ thanh toán COD quý khách vui lòng mua tại đây!

- Mời bạn tham gia Fanpage để cập nhật sản phẩm mới nhất tại đây!

- Mọi thắc mắc, chi tiết xin vui lòng liên hệ Zalo, SĐT:0938833910

 

smile CÁM ƠN QUÝ KHÁCH ĐÃ TIN TƯỞNG ỦNG HỘ QUÂN PHONG RC smile


Phản hồi

Người gửi / điện thoại

Nội dung

 

Từ khóa
Danh mục
Khoảng giá
Tất cả giá
Dưới 100.000
100.000-500.000
500.000-1.000.000
1.000.000-2.000.000
Trên 2.000.000